8 Commits

Author	SHA1	Message	Date
Julien Gautier	05faeca05d	docs(setup): drop deprecated apt packages on Debian 13 trixie ... 10-base-packages.sh was failing on a fresh Trixie VM with `E: Impossible de trouver le paquet software-properties-common`. The package isn't shipped on Trixie anymore, but it was also never needed: 50-docker.sh writes /etc/apt/sources.list.d/docker.list manually and never invokes add-apt-repository. apt-transport-https is a transitional no-op since apt 1.5 (2018, native HTTPS). lsb-release isn't called anywhere either - the codename detection in 50-docker.sh reads /etc/os-release directly. Drop all three from the install list. The minimal set is now what's actually consumed downstream: curl wget git ca-certificates gnupg build-essential pkg-config. Doc table descriptor updated accordingly. Inline comment explains why each kept package is there and why the three dropped ones were not just removed but deliberately excluded - so a future drive-by addition doesn't reintroduce them.	2026-05-24 20:58:38 +02:00
julien	d99254a280	docs(setup): make fail2ban opt-in in 70-hardening.sh (#222) ... ## Summary Follow-up on [#220](#220) / [#221](#221). Makes fail2ban **opt-in** in [`70-hardening.sh`](docs/setup/scripts/70-hardening.sh) instead of installing it unconditionally. Reasoning: some corp environments already ship brute-force protection at the network layer (ACL / corp firewall / appliance) — fail2ban on the host then becomes redundant and can be the wrong layer to debug from when a rule misfires. The other three hardening steps (UFW enable, sshd lockdown) were already prompt-gated; fail2ban was the odd one out. ## What lands | File | Change | | --- | --- | | `docs/setup/scripts/70-hardening.sh` | fail2ban block restructured into three branches: (1) already running → skip; (2) installed but stopped → prompt to enable+start; (3) not installed → prompt to install+enable+start. Each "no" path logs `↪ skip (user choice)` so re-runs don't repeatedly nag if the dev has already declined. | | `docs/setup/01-dev-debian-vm-setup.md` | Table row for `70-hardening.sh` clarified — each sub-step's prompt posture is now visible: UFW prompts before enabling, fail2ban prompts before installing, sshd hardening prompts before applying. `unattended-upgrades` is the only one applied unconditionally. | | `docs/setup/README.md` | Same descriptor adjustment. | ## Test plan - [ ] On a fresh Debian VM with no fail2ban installed, run `70-hardening.sh`, decline the fail2ban prompt → script continues, fail2ban not installed, no service started. - [ ] On the same VM, re-run `70-hardening.sh` → the fail2ban branch prompts again (the dev may have changed their mind); declining again produces the same `↪ skip (user choice)` result. - [ ] On a VM where fail2ban is pre-installed but stopped (rare, but possible if infra rolled it back), the script offers to start it without re-installing. - [x] `pnpm exec prettier --check` clean on the touched files. - [x] `bash -n docs/setup/scripts/70-hardening.sh` (syntax check) clean. --------- Co-authored-by: Julien Gautier <julien.gautier@apf.asso.fr> Reviewed-on: #222	2026-05-24 20:04:16 +02:00
julien	c77313c693	docs(setup): use ~/.bashrc hand-off instead of chsh for zsh switch (#221) ... ## Summary Follow-up fix on [#220](#220). The corp infra locks the default shell at user-provisioning time on the dev VM (`10.100.201.21`) — `chsh` is denied at the PAM level, so the `sudo chsh -s` block in [`20-zsh.sh`](docs/setup/scripts/20-zsh.sh) fails on every fresh VM. Switch to the `~/.bashrc` exec-zsh hand-off — the same proven pattern used in the legacy [`02-wsl-terminal-setup.md`](docs/setup/02-wsl-terminal-setup.md). UX-identical for the dev, zero infra escalation required. ## What lands | File | Change | | --- | --- | | `docs/setup/scripts/20-zsh.sh` | Drop the `sudo chsh -s` block. Append a guarded `exec zsh -l` block to `~/.bashrc` instead, marked with a managed-by comment for idempotency on re-runs. | | `docs/setup/01-dev-debian-vm-setup.md` | Table row for `20-zsh.sh` updated — "set as default shell" → "`~/.bashrc` (exec zsh on interactive shells — `chsh` is blocked on the corp VM)". | | `docs/setup/README.md` | Same descriptor adjustment. | ## The hand-off block ```bash # Managed by docs/setup/scripts/20-zsh.sh — apf-portal zsh hand-off. # Hand off to zsh on interactive shells. The `case $-` guard avoids # breaking non-interactive bash (scp, rsync, cron, …), and the # ZSH_VERSION check prevents an infinite re-exec loop. case $- in *i*) if command -v zsh >/dev/null 2>&1 && [ -z "${ZSH_VERSION-}" ]; then exec zsh -l fi ;; esac ``` Two safety nets in the block: - **`case $- in *i*)`** — only runs the hand-off when the shell flag set contains `i` (interactive). `scp` / `rsync` / non-interactive ssh executions go through bash and are not hijacked. - **`[ -z "${ZSH_VERSION-}" ]`** — `ZSH_VERSION` is set by zsh itself; if it's already set we're already in zsh and a re-exec would loop. ## Test plan - [ ] On the dev VM, run `20-zsh.sh` on a fresh state: bash, no existing `~/.bashrc` zsh hand-off → script exits without `chsh` error, `~/.bashrc` gets the block appended, `exit` + reconnect lands in zsh. - [ ] Re-run `20-zsh.sh` → reports `↪ skip zsh hand-off already in ~/.bashrc` (idempotency). - [ ] `scp some-file vm-dev:/tmp/` from the workstation still works (non-interactive bash not hijacked). - [x] `pnpm exec prettier --check` clean on the touched markdown files. - [x] `bash -n docs/setup/scripts/20-zsh.sh` (syntax check) clean. ## Why not amend #220 #220 has already merged. Squash-merge collapsed it to `8a04540` on main; a force-push to amend would rewrite that commit and break anyone who's pulled it. The fix lands as a separate commit on the same setup-doc family. --------- Co-authored-by: Julien Gautier <julien.gautier@apf.asso.fr> Reviewed-on: #221	2026-05-24 19:55:32 +02:00
julien	8a04540410	docs(setup): add Debian 13 dev-VM setup procedure + scripts + devcontainer (#220) ... ## Summary Adds a full Debian 13 dev-VM setup procedure ([docs/setup/01-dev-debian-vm-setup.md](docs/setup/01-dev-debian-vm-setup.md)) + 10 modular idempotent setup scripts + a systemd template + a `.devcontainer/` spec, in preparation for the new dev VM (`10.100.201.21`) replacing the WSL-based workflow. Both IDE flows (VSCode Remote-SSH + Devcontainer) and both Node toolchains (nvm on host + devcontainer image) are available — devs pick per task. Adjacent context (does not ship here, planned follow-up): - **Preview infra on the GitLab VM (`10.100.201.10`)** — same `dev.compose.yml`, deployed by CI on `main`. Doc placeholder in §8.6. - **GitLab Runner migration** (act_runner Gitea → GitLab Runner Docker executor) — bundled with the Gitea → GitLab cutover. - **Private dotfiles repo** (`apf/dotfiles`) — `~/.zshrc`, `~/.p10k.zsh`, `~/.tmux.conf` versioned. `80-dotfiles.sh` is already structured to fall back to a `~/.dotfiles/` clone when present. No application-code changes. No CI gate impact (doc + scripts + devcontainer spec only). ## What lands | Path | Change | | --- | --- | | `docs/setup/01-dev-debian-vm-setup.md` | **New.** Step-by-step doc: workstation prep (SSH agent + VSCode Remote-SSH + fonts), bootstrap orchestrator, per-script effects, project clone, infra boot, IDE flow A / B / C, apf-ai-service .NET appendix, troubleshooting. | | `docs/setup/02-wsl-terminal-setup.md` | Renamed from `01-wsl-terminal-setup.md`. No content change. | | `docs/setup/03-dev-web-stack.md` | Renamed from `02-dev-web-stack.md`. No content change. | | `docs/setup/04-angular-nx-monorepo.md` | Renamed from `03-angular-nx-monorepo.md`. No content change. | | `docs/setup/README.md` | **New.** Index of the `docs/setup/` folder. | | `docs/setup/scripts/lib.sh` | **New.** Shared helpers — colour-coded log/ok/warn/err/skip, `apt_install` skipping already-installed, `ensure_line` idempotent append, `confirm` prompt. | | `docs/setup/scripts/bootstrap.sh` | **New.** Orchestrator running scripts 10..80 in order with confirmation prompts. | | `docs/setup/scripts/10-base-packages.sh` | **New.** apt update + base packages (curl, wget, git, build-essential, …). | | `docs/setup/scripts/20-zsh.sh` | **New.** zsh + Oh My Zsh (RUNZSH=no, no shell hijack) + Powerlevel10k + `zsh-autosuggestions` + `zsh-syntax-highlighting`. Patches `~/.zshrc` (theme, plugins, fzf hook). | | `docs/setup/scripts/30-cli-tools.sh` | **New.** `bat eza fd-find ripgrep fzf zoxide ncdu keychain` + `jq yq httpie make tree htop tmux direnv dnsutils unzip rsync`. Symlinks Debian-renamed binaries (`batcat`→`bat`, `fdfind`→`fd`) into `~/.local/bin` so notes/aliases.zsh works as-is. | | `docs/setup/scripts/40-node.sh` | **New.** nvm v0.40.1 + Node from `.nvmrc` (currently 24) + corepack enable + pnpm warmed from `package.json#packageManager`. | | `docs/setup/scripts/50-docker.sh` | **New.** Docker CE + compose plugin from docker.com apt repo, user added to `docker` group, `docker.service` enabled at boot. Pinned GPG key + repo line for Debian Trixie. | | `docs/setup/scripts/60-tuning.sh` | **New.** `fs.inotify.max_user_watches=524288` (Vite/Nx watch ceiling), optional 4 GB swapfile, optional hostname rename (only prompts on generic hostnames like `debian13`). | | `docs/setup/scripts/70-hardening.sh` | **New.** Best-effort UFW (`allow OpenSSH` only) + unattended-upgrades on security channel + fail2ban + sshd drop-in (`PermitRootLogin no`, `PasswordAuthentication no`, `AllowAgentForwarding yes`). Probes before applying, validates `sshd -t` before reloading, skips cleanly if infra already locked the box down. | | `docs/setup/scripts/80-dotfiles.sh` | **New.** Symlinks `notes/aliases.zsh` → `~/.oh-my-zsh/custom/aliases.zsh` (backs up an existing target). Copies `notes/gitconfig.txt` to `~/.gitconfig`, prompts for identity, applies via `git config --global user.name/email`. | | `docs/setup/systemd/apf-portal-infra@.service` | **New.** Template systemd unit auto-starting `./infra/local/dev.sh up` at boot. Install: `enable apf-portal-infra@$USER.service`. | | `.devcontainer/devcontainer.json` | **New.** VSCode Dev Container spec on `mcr.microsoft.com/devcontainers/typescript-node:1-24-bookworm`. `docker-outside-of-docker` feature + `--network=apf-portal-dev` so DNS to `postgres`/`redis`/`otel-collector` works. `initializeCommand` fails fast if `dev.sh up` hasn't been run yet. Forwarded ports labelled. Six dev extensions pre-installed. | | `.devcontainer/post-create.sh` | **New.** `corepack enable && pnpm install --frozen-lockfile`. | | `CLAUDE.md` | "Environment conventions" rewritten: documents the two envs (`local` / `development`) + hybrid sub-mode + the two IDE flows (Remote-SSH / Devcontainer), points at the new VM setup doc and the legacy WSL doc. | ## Key choices - **Idempotent scripts, individually runnable.** Each script probes before doing anything (apt package already installed? plugin already cloned? UFW already active? sshd drop-in already present?). Bootstrap is the orchestrator; each script also runs standalone. Re-running after a partial setup is safe and reports `↪ skip` for the no-op cases. - **No private key on the VM — SSH agent forwarding instead.** `~/.ssh/config` on the workstation carries `ForwardAgent yes`; the VM never holds long-lived secrets. Same future pattern for GPG signing (covered in §8.5 as appendix). `keychain` is installed by `30-cli-tools.sh` as a fallback for scenarios where agent forwarding is not available (CI runners, scripts). - **Hardening is "best-effort, probe-first".** Some infra teams ship pre-hardened VMs; this script doesn't fight that. UFW already active? Print rules and skip. unattended-upgrades already on? Skip. SSH already locked down? Skip. Each section validates before reloading so a misconfig can't take SSH offline. - **Devcontainer assumes infra-on-host.** The container runs on the VM but talks to postgres / redis / otel **on the same VM's host docker daemon** through the shared `apf-portal-dev` Compose network. `initializeCommand` fails fast with a clear message if `./infra/local/dev.sh up` hasn't been run yet — better than puzzling `ECONNREFUSED` errors at runtime. - **`60-tuning.sh` raises inotify to 524288.** Default Debian limit is 8K; Vite/Nx in this monorepo blow past that. The setting is persisted in `/etc/sysctl.d/99-apf-portal.conf` so it survives reboot. - **Hybrid mode (workstation IDE + VM infra) is a documented sub-mode.** SSH `LocalForward` directives on 5432/6379/4317/4318 expose the VM's infra services as `localhost:*` on the workstation. Latency cost: 5-15 ms per query, fine for daily work; for long-running flows, wrap in `tmux` or use `autossh`. ## Notes for the reviewer - **Renaming the existing setup docs (01→02, 02→03, 03→04) is the only "destructive" change.** `git log --follow` still works because of `git mv`. Diff shows up as renames, not delete-and-add. - **The brief asked for `bat eza fd-find ripgrep fzf zoxide docker keychain ncdu git`.** `git` is installed by `10-base-packages.sh` (every other script needs it). Everything else lives in `30-cli-tools.sh` + `50-docker.sh`. The "fullstack-dev extras" (`jq yq httpie make tree htop tmux direnv dnsutils unzip rsync`) are additions I proposed in the lock-in question and that you greenlit (full scope) — easy to trim if any of them turn out to be unwanted. - **Both Node toolchains in parallel** — nvm on the VM (via `40-node.sh`) **and** devcontainer in the repo. Devs can use either; both read the same `.nvmrc` + `packageManager` pin so the version stays consistent. - **The systemd unit is a TEMPLATE** (`apf-portal-infra@.service`) — install once, enable per-user (`enable apf-portal-infra@$USER.service`). This is the right shape for a shared VM with multiple devs eventually, even if today only one user uses it. - **No PR-body Co-Authored-By trailer, no Generated-with-Claude footer**, per the project rule. ## Test plan Manual (no automated test exists for this kind of setup work): - [ ] On a fresh Debian 13 VM: `git clone …`, `./docs/setup/scripts/bootstrap.sh`, answer prompts, end up with zsh + Powerlevel10k + all the requested CLI tools + Node 24 + pnpm 10.33.4 + Docker on PATH. - [ ] `./infra/local/dev.sh up` boots successfully against the VM's local docker daemon. - [ ] `pnpm install` + `pnpm exec nx run-many -t lint test --parallel=3` passes on the VM. - [ ] VSCode Remote-SSH from a workstation: connect, open `~/Works/apf_portal`, run `pnpm exec nx serve portal-bff`, confirm reaches `postgres:5432`. - [ ] VSCode Dev Containers from the same workstation: `Reopen in Container`, image builds, `postCreateCommand` runs `pnpm install`, dev server reaches postgres through the `apf-portal-dev` network. - [ ] Hybrid mode: SSH tunnel from workstation, `pnpm exec nx serve portal-bff` locally, confirm postgres reachable via `localhost:5432`. - [x] `pnpm exec prettier --check` clean on the touched markdown files. - [x] Scripts pass `bash -n` (syntax check) — verified during writing. ## What's next - Validate by walking through this doc on the actual VM `10.100.201.21`. Any friction surfaced becomes a follow-up PR (`docs(setup): ...`). - Once the dev VM is operational, return to **ADR-0027 Implementation PR 1** (Region / Delegation / Structure Prisma schema + inline reference-data migration) — paused since the start of this PR. - Set up the **private dotfiles repo** (`apf/dotfiles`) as a small follow-up, then teach `80-dotfiles.sh` to prefer the dotfiles repo over `notes/`. - When migrating to GitLab: PR pair — (a) `git remote set-url` doc updates here, (b) `infra/gitlab-runners/` replacing `infra/ci-runners.compose.yml`. - Future: deploy the **shared preview infra** on `vm-gitlab` (10.100.201.10) — CI-driven, separate PR. --------- Co-authored-by: Julien Gautier <julien.gautier@apf.asso.fr> Reviewed-on: #220	2026-05-24 18:40:07 +02:00
Julien Gautier	0e58e32d29	chore: relocate ADRs from decisions/ to docs/decisions/ to consolidate documentation ... Move the ADR folder under docs/ alongside the rest of the project documentation. Convention (flat folder, globally-sequential 4-digit numbering, tags-based categorization, MADR 4.0.0 format) is unchanged - only the path moved. - git mv decisions docs/decisions preserves history for all 18 ADRs + README + template (19 files renamed in this commit). - ADR-0001 amended in-place with a dated note documenting the relocation. Status remains 'accepted' - the location detail changed, the decision did not. - All cross-references updated: - CLAUDE.md (~17 ADR links + 3 mentions of decisions/ in the Project rules section) - docs/README.md (now references decisions/ as a sibling under docs/) - docs/setup/03-angular-nx-monorepo.md (paths shortened from ../../decisions/ to ../decisions/, since setup/ and decisions/ are now both inside docs/) - docs/decisions/0003 ../CLAUDE.md adjusted to ../../CLAUDE.md (one extra level of nesting) - docs/decisions/template.md mention of the README path - notes/asvs-level-decision-briefing-rssi.md mention of the index Sanity verified: every ADR link in CLAUDE.md, docs/setup/03, and docs/decisions/0001 resolves to an existing file. pnpm nx run-many -t lint passes on 8 projects.	2026-04-30 18:57:59 +02:00
Julien Gautier	880c7ded6b	chore: rename project from adastra_portal to apf_portal ... The host organisation - APF France Handicap - was confirmed on 2026-04-30. Update all in-repo references to use apf_portal (snake_case in prose) and apf-portal (kebab-case workspace name and repo URL). Touched: CLAUDE.md, ADRs 0001/0002/0003/0015, and the Nx bootstrap setup guide. The historical name is preserved as a single sentence in ADR-0003 as a self-validating example of the function-prefixed naming convention designed exactly for this scenario - the apps (portal-shell, portal-bff) and the lib conventions (feature-<name>, shared-<scope>) were unaffected by the rename, which was the explicit point of ADR-0003. Memory state aligned out-of-band: project_adastra.md retired, project_apf_portal.md created with the expanded APF context (host org, health + financial data scope, ASVS L3 pending RSSI input, UI stack decision spartan-ng + CDK + Tailwind, expanded phase-3 status). Pending follow-ups (user-side, not in this commit): - rename the Gitea repo julien/adastra_portal -> julien/apf_portal - git remote set-url origin gitea@git.unespace.com:julien/apf_portal.git - optionally rename the local working directory ~/Works/adastra_portal/ -> ~/Works/apf_portal/	2026-04-30 13:31:38 +02:00
Julien Gautier	084ff5c3bf	docs: add ADR-0007 for pre-commit hooks and align documentation references ... - decisions/0007-pre-commit-hooks-and-conventional-commits.md formalizes Husky + lint-staged + commitlint with Conventional Commits as the local quality-gate baseline. - decisions/README.md index updated. - docs/setup/03 section 8 rewritten to reference the ADR and document the full hook setup (pre-commit, commit-msg, commitlint config). - docs/setup/03 future-work table 'ADR(s)' column removed; future ADR numbers are now assigned at the moment each ADR is written, not pre-reserved. - CLAUDE.md aligned: pre-allocated phase-2 ADR numbers replaced by phase references; a pointer to ADR-0007 added under 'Local quality gates'.	2026-04-29 21:01:49 +02:00
Julien Gautier	79eee77594	chore: initialize repository with project rules, docs, and phase-1 ADRs ... Set up the foundation for the adastra-portal project: - CLAUDE.md captures durable project rules (quality bar, security/perf/a11y as first-class, language, commit conventions, ADR proactivity). - docs/ and decisions/ scaffolding with maintained indexes (docs/README.md and decisions/README.md), MADR 4.0.0 template, and tag vocabulary. - Phase-1 ADRs (0001-0006) lock structural choices: ADR usage, Nx monorepo with the apps preset, naming convention (adastra-portal / portal-shell / portal-bff), Angular CSR/zoneless/Signals/Vitest, NestJS over Express, PostgreSQL with Prisma. - docs/setup/ guides translated to English. - .gitignore covers Node/Nx artifacts and the personal notes/ scratchpad. The Nx workspace itself is not yet bootstrapped; that step is gated on a revised setup guide aligned with the ADRs.	2026-04-29 20:43:00 +02:00